StripFlock® Pro Heat Transfer Vinyl

$5.75

Shipping calculated at checkout.

Quantity

The most trusted heat transfer vinyl brand in the world

Siser StripFlock® Pro is a completely upgraded product from their original StripFlock. It is a textured HTV with a thicker suede-like feel.

This new formulation can now be:

applied at a lower temperature of 311°F for 15 seconds.
peeled hot, which can significantly speed up the application process.

Like the original StripFlock, it can be layered upon itself. Best of all, StripFlock® Pro is also CPSIA certified. Watch for new colors coming soon!

Actual width 14.75"

Cutter Settings:

Cricut	Blade: Standard Setting: Iron-On +
Silhouette Cameo	Blade: Standard, 4 Material: Heat Transfer, Flocked Speed: 5 Force: 6
Brother Scan N Cut	Blade: Standard, 4 Cut Speed: 1 Cut Pressure: 2

Application instructions (home iron)

• Cut in reverse
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use medium pressure for 15 seconds
• Peel carrier hot or cold

StripFlock Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean